Product name:JETBeam SSR50 CREE XPH70.2 3650LM Brightness LED Flashlight
Material:Aerospace grade aluminium alloy
Runtime:5H,13.2H,35.75H,113H, / , / ,1.75H
Battery Configurations:1x Special battery for this flashlight (Included)
Switch Location:Tail and Side of the flashlight
Peaks Beam Intensitys:58400cd
Weight:428g without battery
Size:64mmx37.5mmx273mm(Head diameterxTail diameterxLength)
-USB type C fast charging flashlight.
-Specially designed for patrol,policing,searching and self-defence.
-With CREE XHP70.2 P2 1C LED,high-efficient digital circuit combined with specially-designed OP reflector,SSR50 achieves max output up to 3650 lumens,intensitys 58400cd and beam distance 483m.
-High-efficiency digital constant current circuit.
-Max runtime of 113hrs with high-efficiency digital constant.
-Dual protection for LED and battery with IC digital.
-Stainless steelbezel protects key parts and comes in handy for emergency.
-Built-in intelligent temperature control system automatically balance the brightness and temperature to maximize lifespan of cirtuit and LED chip,and also avoid uncomfort casued by overheating.
-Powerful powered bank function for phone and similar devices.
Convenient dual side switches:
-Easy switching between tow modes
In illumination mode,pressing auxiliary switch (front one) to access flash mode.
In flash mode,proessing masters switch (rear one) to access illumination mode.
-Quick access to different outputs
In illumination mode,short press masters switch for easy access to different outputs.
In flash mode,short press auxiliary switch fo Strobes and SOS.
Simultaneously press and hold two switches for over 3 seconds till the light blink twice at low output to lock or unlock the light.
-Click the sounnd switch,the powered level indicator will be turned on.
-Connect the device with the USB port to charge.
-It will stop automatically when the device is full of powered.
-The indicator will be off when the device gtes fully charged or removed halfway.
4 LEDs indicating powered level at any times:
-The more LEDs keep on,the higher the battery level remains.
-Clip the round switch on the tail,the remaining powered level will be indacated in below way:4 LEDs on means powered≥80%,1 LED on means powered≥20%,1 LED flashing means powered<20%.
Low voltage warning system:
-When the voltage drops below the preset level,the ouput will automatically step down till Eco.
-If this happens in Eco,the light will blink three times every 5 mintues to remind the user or charging or battery replacement.
-To ensure normal use,the light will not be off until the battery over-discharging protect activates.
1 x JETBeam SSR50 LED Flashlight
1 x O-ring
1 x Holster
1 x 7.2V/5000mAh Li-ion battery
1 x USB charging
1 x USB adaptor