Price: [price_with_discount]
Lumintop BLF GT70 is equipped with a Cree XHP 70.2 and uses a Narsilm V1.3 fairmware. The detail see below descprition and the manual .
Specifications:
Emitter: 12 V Cree XHP70.2 High Intensity, cool white, mounted on copper DTP MCPCB
Flux: 7500 lm
Intensity: >500 kcd (ANSI throw >1400 m)
Firmware: Tom E’s open-source NarsilM v1.3 adapted by Texas_Ace
User interface:
[1] By default the GT70 is set to use the very intuitive Narsil smooth RAMPING UI. Instant access to a 2.5 A TURBO mode is also provided.
[2] A more conventional discrete level MODE-SET UI is available as an alternative. Anyone of 12 pre-defined mode-sets can be selected.
[3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets.
Battery: Four or eight button-top 18650 cells (4S1P or 4S2P). Protected cells are recommended.
Driver: 12V, Texas Avenger V2
Reflector: 118 mm inner diameter, aluminum, smooth finish
Lens: Glass with anti-reflective coating
Body: Aluminum with Type III hard-coat anodizing
Tripod socket: Standard 1/4 inch threaded (1/4-20 UNC)
Button: Tactile with back-lit rubber boot
Ingress rating: Equivalent to IP65, do not immerse in liquids
Weight: Approximately 1.8 kg without cells
Dimensions: 135 mm Ø head x 315 mm length
Package List:
1 x Lumintop GT70 Flashlight
2 x O-rings
1 x User manual (English)
Package List:
1 x Lumintop GT70 Flashlight
8 x 18650 3500mAh Battery
2 x O-rings
1 x User manual (English)
Note: If you no need battery , just choose the option ” Without battery” ; if you need the battery, please do choose the option: “Include battery)”! Thank you for choose Lumintop!
